Technical Informations

Turning
- Side turning
- Chamfering
- Finishing of grooves
- Swarf ring creation
- Face grooving
- Profiled inserts
- Thread – Overview
- Thread: Recommended number of passes
- Feed direction internal threading
- In-Feed
- Parting off
- Different methods of coolant supply
- Coolant supply options
- Reinforced Blades – Positioning

Milling
Slot milling:
- Feed rates and time calculation
- Projection length of the cutter
- Diameter of the cutter
- Tightening torque of the clamping screws
- Milling direction
- Dipping into the workpiece
- Drilling milling or pocketing by helical interpolation
- Single-edged inserts
- Thread milling
- Choice of carbide grades
- Milling straight grooves - outside
- Milling of an internal groove
- Tightening torques
- Available Milling Shanks
- Cutting data


Ultra Hard Cutting Materials
- HORN 3D chip breaker
- ISO inserts: chip breakers
- ISO number key
- Surface quality
- Wiper geometries
- Balacing
- Diamond cutting materials
- Description of cutting materials according to DIN ISO 513 (2001)